LG Pro Centric 55ET960H - Page 55

55
206-4350
Cloning Procedures (Cont.)
(Continued from previous page)
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also, note that Diagnostics is for service use only.
X
TV MANAGER
USB 1: Device Name
Select the desired option below.
USB DEVICE
DIAGNOSTICS: ON
Ez Download Data Cloning Image Download
Icon Download Video Download Software Update
6. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device on which you wish to save the Clone le. If necessary, use the arrow keys on
the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the
screen and press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the
appropriate USB device from the pop-up list of USB devices.
USB DEVICE
USB 1: Device 1
USB 2: Device 2
7. Use the arrow keys to select Data Cloning, and then press the Wheel (OK) button.
8. With the Data Cloning screen on display, key in the following number sequence on the Installer
Remote: 9-8-7-6. This will provide access to the “Export Clone File” option in the TV Manager
(see example on following page).
9. Use the Up/Down arrow keys to select Export Clone File, and then press the Wheel (OK)
button.
Clone lename parameters will be displayed on the screen.
10. Modify the lename, as required. While the TV model element of the lename may not be
changed, you can differentiate this Clone le from other ET960H Clone les by changing
the numeric assignment appended to the end of the lename. Select/highlight the lename,
and then use the Up/Down arrow keys on the Installer Remote to scroll through numeric
assignments until the desired number is shown.
(Continued on next page)