73
206-4350
(Continued on next page)
Network
Pro:Centric
Portal Settings
Media Share
PRO:CENTRIC
Mode
Configuration Only
Update Event
Update Time
2:00 AM
Media Type
RF
Data Channel
AUTO
^
^
^
^
(Continued from previous page)
The network address will be pinged 10 times and then a summary of
the ping statistics will be displayed, for example:
PING TEST RESULT
Ping statistics for [
xxx.xxx.xxx.xxx
]
Packets : Sent = 10, Received = 10, Lost = 0 (0% loss)
Approximate round trip times in milliseconds
Minimum = 0.462 ms, Maximum = 5.43 ms, Average = 1.784 ms
5. Select OK in the pop-up window, and then press the Wheel (OK)
button on the Installer Remote to close the pop-up window when
you are nished.
Pro:Centric Setup
Pro:Centric options enable you to congure the TV with the appropriate
settings to connect to the Pro:Centric server. Use the Up/Down arrow
keys on the Installer Remote to navigate between elds.
1. With the IP Environment Menu on display, use the arrow keys on
the Installer Remote to select the Pro:Centric menu option. Then,
press the Wheel (OK) button.
2. Select/highlight the Media Type eld and press the Wheel (OK)
button on the Installer Remote to display the drop-down list of
options. Then use the Up/Down arrow keys to select either RF or
IP, as applicable.
Note: By default, the Pro:Centric Menu initially shows RF
conguration elds. When “IP” is selected as the Media Type,
Server Address, IP Type, IP Address, and Port Number elds
appear on the screen (in place of the Data Channel eld).
Note: If the Media Type has already been set in the EZ-Manager
Wizard, the specied value will be reected in this eld.
3. Refer to the appropriate subsection(s) below to congure the TV’s
Pro:Centric settings to match those of the Pro:Centric server.
While the Pro:Centric application itself is an additional feature (see
step 4), the appropriate Pro:Centric server conguration must be
completed to enable TV E-Z Installation (conguration and software)
data downloads and, if congured, the Pro:Centric application
download.
IP Environment Setup (Cont.)