84
206-4350
Reference: Downloading Images or Icons using a USB Memory Device
(Cont.)
(Continued from previous page)
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
X
TV MANAGER
USB 1:
Device Name
Select the desired option below.
USB DEVICE
DIAGNOSTICS: ON
Ez Download Data Cloning Image Download
Icon Download Video Download Software Update
5. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the image le you wish to use. If necessary, use the arrow keys on
the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the
screen and press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the
appropriate USB device from the pop-up list of USB devices.
USB DEVICE
USB 1: Device 1
USB 2: Device 2
6. Use the arrow keys to select Image Download or Icon Download, as applicable, and then
press the Wheel (OK) button.
Depending on your selection in the previous step, either the Image Download or Icon Download
screen will be displayed. The example on the following page illustrates an Image Download
screen.
Note: You can select the
(STORAGE) button at the top of the screen to check the amount
of storage available for and currently in use by media (image, icon, and video) les. Storage
data will be displayed in a pop-up window. When you are nished, select OK to close the
pop-up window. If you would like to clear all of the image or icon (depending on your selection
in step 6) les currently in storage, select the CLEAR STORAGE button. Then, in the
conrmation pop-up window, select YES to clear the les, or select NO to return to the Image
Download or Icon Download screen, as applicable, without clearing the les.
7. Use the Up/Down arrow keys to select the appropriate option from the list of le types at the
left of the screen, and then press the Wheel (OK) button.
(Continued on next page)
To Next Page
Loading...
