88
206-4350
Reference: Downloading a Hotel Video using a USB Memory Device
(Cont.)
(Continued from previous page)
7. In the thumbnail area at the right of the screen, use the arrow keys to select/highlight the
video le to download. Press the Wheel (OK) button to select a le (a checkmark identies
a selected le). See also video guidelines at the beginning of this section.
8. When you are ready to download the video le, select DOWNLOAD on the screen, and then
press the Wheel (OK) button on the Installer Remote.
Download progress will be displayed on the screen. Do NOT remove the USB device until
the video download is complete. When the download process is complete, a “Video Download
is completed” message will be displayed on the screen, and a “DONE” button will be displayed/
activated at the top right of the screen.
9. Check the download status—at the left of the screen—for the video to make sure the
download was successful, and then press the Wheel (OK) button on the Installer Remote to
select DONE.
When you select “DONE,” the Video Download screen will be redisplayed, and you can perform
other TV Manager functions, as required.
To Next Page
Loading...
