66
206-4317 Draft A.2
GAME CONTROL/MPI
When the TV/EBL is in Pass-through Mode, the
MPI function enables an external MPI control
device (i.e., VOD/PPV STB, etc.) to control the TV.
Game Control—EBL in SONIFI PPV Mode only.
TV-LINK CFG
(
3.5 mm jack) Use to connect PC to TV (EBL)
for local FTG Mode via EBL configuration.
Reference: LV570H Rear and Side Jack Panels
Side Jack Panel
HDMI IN 2 & 3
Connection for HDMI output
from external device.
USB IN
Insert USB memory device
for software updates, cloning
purposes, FTG Mode via CPU
configuration, picture/music
entertainment, etc., as applicable.
..........
USB IN
..........
3
IN
2
Caution: Do NOT connect a
standard Ethernet cable to the
RJP port, as this may damage
the TV and network equipment.
RGB IN (PC)
AV IN/AUDIO IN (RGB DVI)
L R
SPEAKER OUT
LINE OUT
RJP Use Only
GAME CONTROL
/ MPI
L/MONO -AUDIO- R
ANTENNA /
CABLE IN
LAN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
RESET
UPDATE
IN
SERVICE
ONLY
TV-LINK CFG
1
UPDATE
Restricted to software
updates.
RESET
Initiates a hardware reset
and turns the TV OFF.
SPEAKER OUT
LINE OUT
(
3.5 mm jack) Connect external audio
(fi xed speaker, variable speaker, or fi xed
line level [amplifi er]) equipment. See
Reference section, “External Stereo
Speaker Setup,” for further information.
ANTENNA/CABLE IN
Connect to Antenna/
CATV.
SERVICE ONLY
Restricted to service updates.
RGB IN (PC)
Connection for RGB
output from PC.
AV IN/AUDIO IN (RGB DVI)
Connect composite audio/video
output from external device, or
connect audio for RGB or DVI device.
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater
systems. Note: When the TV is
OFF, this port is not enabled.
LAN
Use for network connection
(i.e., for Pro:Centric data).
RJP Use Only
Connection for Remote Jack Pack (RJP)
Control cable.
HDMI IN 1
Connection for HDMI/DVI
output from external device.
To Next Page
Loading...
