Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
1. Application range
This spec sheet is applied all of the DLP Projector with FM51A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C, CST: 40 °C ± 2 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
(1) Performance: LGE PROJECTOR test method followed
(2) Demanded other specification
Safety : KCC, IEC, CE specification (EN55022 Class B), CCC.
EMC : KCC, IEC, CE specification (EN60950-1), CCC.
4. Model General Specification
No Item Specication Remark
Min Max Unit
1 Video input applicable system 1) NTSC M
2) PAL-B,D,G,H,I
3) PAL M
4) PAL N
5) PAL 60
6) SECAM
3.579545 / 60 Hz
4.433618 / 50 Hz
3.575611 / 60 Hz
3.582056 / 50 Hz
4.433618 / 60Hz
2 Power Adapter - DC 19 V @ 3.42A (65W)
3 Input Voltage AC 100 ~ 240(± 10 %)V, 50/ 60Hz
4 Market North America PW800-NA
Global PW800G-GL
Europe PW800-EU
Middle Asia PW800-MA
Columbia PW800-CB
5 Picture size WXGA (1280 x 800)
6 Aspect ratio 16:10 Panel Resolution
7 Operating Temperature 0 40 deg
8 Operating Humidity 80 %
9 Storage Temperature -20 60 deg
10 Storage Humidity 85 %