41
TROUBLESHOOTING
ENGLISH
Excess static in clothes
after drying.
Clothes have dried for too long (overdried).
• Overdrying a load of clothes can cause a buildup of static electricity. Adjust
settings and use a shorter drying time, or use Sensor Dry programmes.
Drying synthetics, permanent press, or synthetic blends.
• These fabrics are naturally more prone to static buildup. Try using fabric
softener, or use shorter Timed Drying time settings.
Clothes have damp
spots after a Sensor
Dry programme.
Very large load or very small load. Single large item such as a blanket or
comforter.
• If items are too tightly packed or too sparse the sensor may have trouble
reading the dryness level of the load. Use a Timed Drying programme for
very small loads.
• Large, bulky items such as blankets or comforters can sometimes wrap
themselves into a tight ball of fabric. The outside layers will dry and
register on the sensors, while the inner core remains damp. When drying
a single bulky item, it may help to pause the cycle once or twice and
rearrange the item to unwrap and expose any damp areas.
• To dry a few remaining damp items from a very large load or a few damp
spots on a large item after a Sensor Dry programme has completed, empty
the lint filter, then set a Timed Drying programme to finish drying the
item(s).
Symptoms Possible Cause & Solution
To Next Page
Loading...
Need help?
General
Weight and Dimensions
