LG RK1 Simple Manual

Speaker Assembling
Please be careful not to damage the top of unit
when place the speaker upside down.
,
Additional Information
Specifications
Power Requirements
Refer to the main label on
the unit.
Power Consumption
Refer to the main label on
the unit.
Networked standby : 0.5 W
(If all network ports are
activated.)
Dimensions (W x H x D)
Approx.
136 mm x 962 mm x 164 mm
(266 mm x 962 mm x 294 mm
with stand)
Bus Power Supply (USB)
5 V
0
500 mA
Amplier
(Total RMS output power)
100 W RMS
Design and specications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit by pressing the power button for more than 5
seconds.
Replacement of battery
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
High Power Speaker System is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of conformity is available at the
following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
TOP
TOP
TOP
TOP
RK1-D.AEUSLLK_SIM_ENG_MFL69940448.indd 3 2018-01-25  11:07:54

LG RK1 Specifications

General

Brand	LG
Model	RK1
Category	Speaker System
Language	English