LG RS-Q20HWZE - Using the Light off Function (Optional); Using the Comfort Air Function (Optional); Using the AP(AC) + 4 Function (Optional)

24
EN
Using the Light Off Function
(Optional)
Display Screen Brightness
You can set the brightness of the indoor unit
display screen.
• Press Light Off button.
NOTE
• Turn on/off the Display screen.
• If the brightness of an indoor appliance’s
display is set to OFF, pressing a button on the
remote control automatically turns the display
on for 5 seconds.
• This function may operate differently,
depending on the model.
Using the Comfort Air
Function (Optional)
Comfort Vane Operation
This function conveniently sets the vane to a
preset position to deflect the supply air away
from blowing directly onto the occupants in the
room.
1
Turn the appliance on.
2
Press Comfort Air button repeatedly and
select the desired direction.
•
or is displayed on the display
screen.
NOTE
• or is displayed on some indoor units.
• This function is disabled when you press
Mode or 6-in-1/VIRAAT button.
• This function is disabled and auto swing of
vertical direction is set up when you press
button.
• When this function is off, the horizontal vane
operates automatically depending on the set
mode.
Using the AP(AC) + 4
Function (Optional)
1
Turn the appliance on.
2
Press 6-in-1/AP(AC) + 4 button.
• Press 6-in-1/AP(AC) + 4 button
repeatedly to select each step.
NOTE
• 1 step (AI Plus Convertible Mode / AI
Convertible Mode) : The air conditioner
analyzes the surrounding environment and
usage patterns to reach the desired
temperature quickly. The airflow direction and
fan speed are automatically adjusted to
achieve the comfort settings.
−
( ) is displayed on the display screen.
• 2 step : The power Input is decreased by 20
% compared to rated power input.
−
is displayed on the display screen.
• 3 step : The power Input is decreased by 40
% compared to rated power input.
−
is displayed on the display screen.
• 4 step : The power Input is decreased by 60
% compared to rated power input.
−
is displayed on the display screen.
•
(2 step), (3 step) is displayed on some
indoor units.
• This function is available with Cooling Mode.
• Capacity may decrease when AP(AC) + 4 is
selected.
• Desired temperature is displayed about 5
seconds if you press Fan Speed,
or
button.
• Room temperature is displayed about 5
seconds if you press Room Temp. button.