37
MAINTENANCE
ENGLISH
Cleaning the Appliance
Periodically
Wiping the Moisture Sensor
This device senses the moisture level of the clothes
during operation, which means it must be cleaned
regularly to remove any build-up of lime scale on
the surface of the sensor.
Wipe the sensors inside the drum.
• Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a dry
rough acrylic sponge.
Cleaning the Cool Air Inlet Grill
Vacuum the cool air inlet grill 3 - 4 times a year to
make sure there is no build up of lint or dirt that
may cause improper air flow.
• Warm air is expelled through the ventilation grill.
• Adequate room ventilation should be provided
to avoid the back flow of gases into the room
from units burning other fuels, such as open
fires.
To Next Page
Loading...
