21
PROGRAMMING MODE
3. How to enter the
Entering set up
mode.
You will see LqC1
Button Display
Press the High Temp. button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Structure of Content of
• Special price days apply or not
• Disabled
• Add super wash apply or not
• Select vend type
• Sense dry apply or not
• Pre-wash apply or not
• Top off apply or not (only for dryer)
• Twin spray apply or not
• Disable
• Enable
※
If you need to use top off function on card
reader type, “toFF” should be set “Enable”
manually after Card reader setup insulting
setup card. Because“toFF” set to be “Disable”
after doing that.
1 MFL67863726_en_180511.indd 21 2018-05-11 오후 1:16:08
To Next Page
Loading...
Need help?
General
