15
ENGLISH
When connecting with a Euro scart cable
DVD
1
1
2
3
Connect the Euro scart socket of the DVD player to the AV1 Euro scart socket on the set. Please use shielded
scart cable.
Turn on the DVD player, insert a DVD.
Select
AV 1 input source with using the INPUT button on the remote control.
- If connected to AV2 Euro scart socket, select
AV 2 input source.
DVD Setup
When connecting with a component cable
DVD
1
1
2
2
3
4
5
Connect the video outputs (Y, PB, PR) of the DVD player to the COMPONENT VIDEO (Y, PB, PR) jacks on the set.
Connect the audio outputs of the DVD player to the COMPONENT AUDIO jacks on the set.
Turn on the DVD player, insert a DVD.
Select
Component input source with using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to
the component input ports as shown below.
Y PB
PR
Component ports on the TV
Y
Y
Y
Y
Pb
B-Y
Cb
P
B
Pr
R-Y
Cr
P
R
Video output ports
on DVD player
TV Back panel
TV side panel
To Next Page
Loading...
