20
Fn key combinations
The following table shows the function of each combination of Fn with a function key.
Function of Fn keys has nothing to do with Operating System.
Ch3. System information
Darken the LCD Nine steps are available. [Fn]+[▼]
Brighten the LCD Nine steps are available. [Fn]+[▲]
Keys with square mark are enabled.
“.Del” key functions as an Insert key while Num Lock is off.
[Fn]+[Num Lk]
Maximum power-saving mode (When OSD is installed). [Fn]+[F12]
Fan control function CPU Cooling Fan control mode (Normal / Slow/ Fast) [Fn]+[F11]
Shows System information [Fn]+[F10]
Mute(Sound On / Off) [Fn]+[F9]
Power scheme change (Refer to the Battery Miser) [Fn]+[F8]
Monitor toggle. When the computer is attached to an external monitor, you can
change the display output location with [Fn] + [F7] combination.
[Fn]+[F7]
Wireless LAN, Bluetooth On/Off.
Setting is available at OSD. The default is set to Wireless LAN, Bluetooth On/Off.
[Fn]+[F6]
Press the combination keys each time for Touchpad Enable / Touchpad Disable /
Touchpad Auto-dasable.
In Touchpad Auto-disable mode, Touchpad is disabled while USB or PS2 mouse is
connected.
Press again to change touchpad modes.
[Fn]+[F5]
Force the computer to enter power-saving mode. (ex: system standby or hibernation) [Fn]+[F4]
User defined Hot key. (Setting is available at OSD) [Fn]+[F3]
User defined Hot key. (Setting is available at OSD) [Fn]+[F2]
User defined Hot key. (Setting is available at OSD) [Fn]+[F1]