LG S12ET User Manual

25
EN
Using the Energy Control
Function (Optional)
1
Turn the appliance on.
2
Press ENERGY CTRL button.
• Press ENERGY CTRL button repeatedly
to select each step.
1 step 2 step 3 step
NOTE
• 1 step : The power Input is decreased by 20
% compared to rated power input.
− is displayed on the display screen.
• 2 step : The power Input is decreased by 40
% compared to rated power input.
− is displayed on the display screen.
• 3 step (Optional) : The power Input is
decreased by 60 % compared to rated power
input.
− is displayed on the display screen.
• (1 step), (2 step), (3 step) is
displayed on some indoor units.
( (1 step), (2 step) is displayed on some
indoor units.)
• This function is available with Cooling Mode.
• Capacity may decrease when Energy Control
mode is selected.
• Desired temperature is displayed about 5
seconds if you press FAN SPEED, or
button.
• Room temperature is displayed about 5
seconds if you press ROOM TEMP button.
• When connected to the Multi Outdoor unit, this
function may not be supported.
Using Special Functions
1
Turn the appliance on.
2
Press FUNC button repeatedly to select the
desired function.
3
Press SET/CANCEL button to finish.
Display
Screen
Description
The Ion generator uses millions
of ions to help improve indoor
air quality.
To reduce noise from outdoor
units.
To remove moisture generated
inside the indoor unit.
NOTE
• Some functions may not be supported,
depending on the model.
• Some functions may operate differently from
the remote control display.

LG S12ET Specifications

General

Type	Split System
Energy Efficiency Ratio (EER)	3.21
Refrigerant	R410A
Compressor Type	Rotary
Energy Efficiency Class	A++
Power Supply	220-240V, 50Hz
Operating Temperature (Cooling)	18°C
Cooling Capacity	12000 BTU/h