LG S4 - Jet Cool Operation

or or
During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely
high speed for 30 minutes setting the room temp. automatically to 18
°C. It is especially used to
cool the room temp. quickly in a hot summer.
In heat pump mode or auto changeover mode, however, the JET COOL function is not available.
In order to return to the normal cooling mode from the JET COOL mode, just press the operation
mode selection button, airflow volume selection, temp. setting button or the JE
T COOL button
again.
NOTICE
Press the Start/Stop button.
The unit will respond with
a beep.
Press the Jet Cool button to operate
the speed cooling mode and the unit
will operate at super high fan speed
on cooling mode for 30 minutes.
To
cancel the Jet Cool mode, press the Jet Cool button, the
fan
speed button or the room temperature setting button
again
and the unit will operate at high fan speed on cooling
mode.
1
2
3
Jet cool operation
20 Room Air Conditioner
Introduction