LG S90QY User Manual

8
Connecting the wireless subwoofer manually
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the
subwoofer. If this is the case, connect them in the following order.
a Press the Power
button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless subwoofer. Check if the LED on the back of the
subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on
the back of the subwoofer again.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the back of the wireless subwoofer light up
in green.
Note
• Install the sound bar as close to the wireless subwoofer as possible. The closer the distance between the sound
bar and the wireless subwoofer, the better the sound quality.
• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.
• To prevent wireless interference, maintain a distance of at least 1 m (3.3 ft) between the sound bar or the
wireless subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless
routers, microwave ovens, etc.).

LG S90QY Specifications

General

USB port	Yes
Ethernet LAN	No
Bluetooth codec	SBC / AAC
Bluetooth version	5
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Package type	Box
Package depth	261 mm
Package width	1296 mm
Package height	574 mm
Package weight	20800 g
Subwoofer type	Active subwoofer
Subwoofer sensitivity	86 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	8 \
Soundbar power consumption	78 W
Power consumption (standby)	0.5 W
Power consumption (typical)	118 W
Subwoofer power consumption	40 W
Color name	Dark Steel Silver
Display type	LCD
Product color	Silver
Audio formats supported	AAC, AAC+, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	DTS-HD HR, DTS-HD Master Audio, Dolby Digital Plus, DTS:X, Dolby Atmos, Dolby Digital, DTS Digital Surround, Dolby TrueHD
Equalizer modes	Bass Blast+, Bass Blast, Movie
RMS rated power	570 W
Audio output channels	5.1.3 channels
Front speakers RMS power	90 W
Audio sample rate (24bit)	96 kHz
Center speaker sensitivity	83 dB
Sustainability certificates	ENERGY STAR
Cables included	HDMI
Number of products included	1 pc(s)
Impedance	4 Ω
Number of speakers	9
Soundbar speaker RMS power	350 W

Weight and Dimensions

Depth	135 mm
Width	1200 mm
Height	63 mm
Soundbar weight	5030 g
Subwoofer depth	403 mm
Subwoofer width	201 mm
Subwoofer height	407 mm
Subwoofer weight	10000 g