To Next Page

To Previous Page

Connecting the rear speakers to the wireless receiver (SPQ8-S, sold

separately)

Automatic connection

After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the

sound bar to the wireless receiver in the following order.

a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the

black striped cable to the negative terminal and the other cable to the positive terminal.

b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.

Receiver Terminal Color Speaker Position

Blue

L Left rear

Gray

R Right rear

c Plug the power cable into the wireless receiver.

d Plug the power cable connected to the wireless receiver into an outlet.

e Press the Power

button on the sound bar to turn it on.

f When the connection is automatically established, you will see the LED on the front of the wireless receiver

light up in green.

Note

• Please only use the speakers provided with the product. Using other speakers may cause malfunction.

• Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive

terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound

or produce no bass.

Other manuals for LG S90QY

Questions and Answers:

Need help?

Do you have a question about the LG S90QY and is the answer not in the manual?

General

USB port	Yes
Ethernet LAN	No
Bluetooth codec	SBC / AAC
Bluetooth version	5
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Package type	Box
Package depth	261 mm
Package width	1296 mm
Package height	574 mm
Package weight	20800 g
Subwoofer type	Active subwoofer
Subwoofer sensitivity	86 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	8 \
Soundbar power consumption	78 W
Power consumption (standby)	0.5 W
Power consumption (typical)	118 W
Subwoofer power consumption	40 W
Color name	Dark Steel Silver
Display type	LCD
Product color	Silver
Audio formats supported	AAC, AAC+, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	DTS-HD HR, DTS-HD Master Audio, Dolby Digital Plus, DTS:X, Dolby Atmos, Dolby Digital, DTS Digital Surround, Dolby TrueHD
Equalizer modes	Bass Blast+, Bass Blast, Movie
RMS rated power	570 W
Audio output channels	5.1.3 channels
Front speakers RMS power	90 W
Audio sample rate (24bit)	96 kHz
Center speaker sensitivity	83 dB
Sustainability certificates	ENERGY STAR
Cables included	HDMI
Number of products included	1 pc(s)
Impedance	4 Ω
Number of speakers	9
Soundbar speaker RMS power	350 W