To Next PageTo Next PageWhat to do if the remote control for my LG S93T1-C does not work?
If the remote control for your LG Home Theater System isn't working correctly, it could be due to several reasons: make sure the remote is pointed directly at the unit's remote sensor, ensure you are not too far away from the unit, remove any obstacles blocking the path between the remote and the unit, and check whether the batteries in the remote are exhausted.
Why is my LG S93T1-C remote control not working?
The remote control might not be pointed at the remote sensor on the unit, or it might be too far away. There could also be an obstacle blocking the path between the remote and the unit. Finally, the batteries in the remote control might be exhausted.
What to do if my LG S93T1-C is plugged in, but the power will not turn on or off?
You can reset the unit by unplugging the power cord, waiting at least five seconds, and then plugging it in again.
Why is there no sound or distorted sound from my LG S93T1-C?
The unit may be in scan, slow motion, or pause mode. Also, the sound volume might be too low. Ensure that the speaker cable is securely connected.
What to do if my LG S93T1-C remote control does not work properly?
There might be several reasons why the remote control for your LG Home Theater System isn't working correctly: * Ensure that the remote control is pointed directly at the remote sensor on the unit. * Make sure the remote control is not too far away from the unit. * Check for any obstacles between the remote control and the unit. * Verify that the batteries in the remote control are not exhausted.
What to do if my LG S93T1-C does not start playback?
If your LG Home Theater System isn't starting playback, make sure that you have inserted a playable disc, verifying the disc type, color system, and regional code. Ensure the disc is placed with the playback side facing down. Clean the disc if it's dirty. Also, check if the Rating function is enabled and adjust or cancel it as necessary.
Why won't my LG S93T1-C Home Theater System start playback?
Make sure you have inserted a playable disc, checking its type, color system, and regional code. Ensure the disc is placed with the playback side down and is clean. Also, cancel the Rating function or change the rating level.
What to do if my LG S93T1-C is not displaying a picture?
Select the correct video input mode on your TV, ensuring it matches the unit's output. Verify that the video connections are secure. Also, check the [HDMI Color Setting] in the [Settings] menu to ensure it is appropriate for your video connection. Your TV might not support the resolution set on the player, so try changing it. If the player’s HDMI OUT jack is connected to a DVI device that does not support copyright protection, this could also be the cause.
General| Brand | LG |
|---|---|
| Model | S93T1-C |
| Category | Home Theater System |
| Language | English |
