LG S95QR Simple Manual

ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
A Sound bar
B Remote Control Receiver / Status Display
C Wireless Rear Speakers
D Wireless Subwoofer - Install it close to the sound bar.
E External Device - (Blu-ray player, game console, etc.)
a Connect the sound bar to your TV via an optical cable or an HDMI cable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
c Connect to power in the following order: wireless subwoofer [ wireless rear speakers [ sound bar. Then, turn on the sound
bar. When the connection is automatically established with the sound bar, the LEDs on the wireless subwoofer and wireless rear
speakers will light up green.
d Using the product with your TV
A Press the Function
button repeatedly until “OPT/HDMI ARC” appears on the status display.
B On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
C When the TV is properly connected to the product, “OPT”, “ ARC”, or “E-ARC” will appear on the status display with a sound.
You can enjoy the sound by connecting LG WOWCAST (Sold separately, WTP3) to the sound bar wirelessly.
e Connecting the product to your smartphone via Wi-Fi
A Connect your smartphone to Wi-Fi.
B Install the LG Sound Bar app on Google Play or the App Store.
C Run the LG Sound Bar app and follow the instructions.
D The product will connect to your smartphone and you can control the product with LG Sound Bar app.
f Connecting the product to your smartphone via Bluetooth
A Tap the Settings
button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off >
On)
B Press the Bluetooth pair
button. After a moment, you will see “BT READY” on the status display.
C Find and tap “LG_Speaker_S95QR_XXXX” or the name you registered on the Google Home app.
D When the product is connected to your smartphone via Bluetooth, you can see the status display change from “PAIRED” [
“Connected Bluetooth device name” [ “BT”.
If you see a red LED on the back of the wireless subwoofer or wireless rear speakers, it means that the sound bar is not connected to the
speakers. If this is the case, connect them in the following order.
A Press the Power
button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless subwoofer or wireless rear speakers. Check if each LED blinks green.
- If you still see a red LED on the back of the wireless subwoofer or wireless rear speakers, press and hold the button on the back of the
subwoofer or wireless rear speakers again.
C Press the Power
button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the back of the wireless subwoofer or wireless rear speakers light up
green.
Keep the sound bar, the subwoofer and wireless rear speakers away from the device (ex. wireless router, microwave oven, etc.) over 1 m to
prevent wireless interference.
y Some speakers may not make sound depend on the input source. Select CINEMA sound mode to listen through all speakers.
y Design and specications are subject to change without notice.
y Google Play is a trademark of Google LLC.
S95QR.DEUSLLV_SIMPLE_MFL72121803.indd 3 2024-04-08  5:48:06

LG S95QR Specifications

General

HDCP	Yes
AUX in	No
HDMI in	2
Bluetooth codec	SBC / AAC
Bluetooth version	5
HDMI ports quantity	3
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Sustainability certificates	ENERGY STAR
Color name	Dark Steel Silver
Display type	LCD
Product color	Silver
Audio formats supported	AAC, AAC+, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	DTS-HD HR, DTS-HD Master Audio, Dolby Digital Plus, DTS:X, Dolby Atmos, Dolby Digital, DTS Digital Surround, Dolby TrueHD
Equalizer modes	Bass Blast+, Bass Blast, Movie
RMS rated power	810 W
Audio output channels	9.1.5 channels
Center speaker RMS power	40 W
Audio sample rate (24bit)	96 kHz
Center speaker sensitivity	83 dB
Surround speaker RMS power	90 W
Rear(top) speaker RMS power	80 W
Subwoofer type	Active subwoofer
Subwoofer sensitivity	86 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	8 \
Package type	Box
Package depth	261 mm
Package width	1296 mm
Package height	574 mm
Package weight	25300 g
Soundbar power consumption	78 W
Power consumption (standby)	0.5 W
Power consumption (typical)	118 W
Cables included	HDMI
Number of products included	1 pc(s)
Number of speakers	15
Soundbar speaker RMS power	350 W

Weight and Dimensions

Depth	135 mm
Width	1200 mm
Height	63 mm
Soundbar weight	5030 g
Subwoofer depth	403 mm
Subwoofer width	201 mm
Subwoofer height	407 mm
Subwoofer weight	10000 g
Rear speaker depth	152 mm
Rear speaker height	223 mm