LG SC9S User Manual

10
Checking connection status with the LED colour
You can check the connection status with the LED on the front of the wireless receiver.
LED Colour Status
Blinking green Connecting In progress
Green Connected successfully
Red Bad connection, or the receiver is in standby
Off Power cable not connected
Manual connection
If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the
receiver. If this is the case, connect them in the following order.
a Press the Power
button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless
receiver is blinking green.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the front of the wireless receiver light up
green.
Note
• Keep the rear speakers at least 30 cm away from the TV or monitor.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless
receiver and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,
microwave ovens, etc.).

LG SC9S Specifications

General

Line-in	No
Bluetooth	Yes
Bluetooth codec	SBC, AAC
Bluetooth version	5
Headphone outputs	0
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Subwoofer type	Active subwoofer
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	7 \
Display type	LED
Certification	Carbon Trust, UL ECV, Eco-Product, Energy Star
Product color	Black
Audio formats supported	AAC, AAC+, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	DTS Digital Surround, DTS-HD HR, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
Equalizer modes	Bass Blast, Bass Blast+
RMS rated power	400 W
Audio output channels	3.1.3 channels
Top speaker RMS power	90 W
Center speaker RMS power	30 W
Front speakers RMS power	60 W
Audio sample rate (24bit)	96 kHz
Center speaker sensitivity	83 dB
Cables included	HDMI
Number of products included	1 pc(s)
Impedance	4 Ω
Number of speakers	9
Soundbar speaker RMS power	180 W
AC input frequency	50 Hz
Soundbar power consumption	37 W
Power consumption (standby)	0.5 W
Power consumption (typical)	75 W
Subwoofer power consumption	38 W
Package type	Box
Package depth	261 mm
Package width	1296 mm
Package height	574 mm
Package weight	22700 g

Weight and Dimensions

Depth	284 mm
Width	1221 mm
Height	47 mm
Soundbar weight	4100 g
Subwoofer depth	313 mm
Subwoofer width	221 mm
Subwoofer height	390 mm
Subwoofer weight	7800 g