LG SC9S User Manual

8
Connecting the wireless subwoofer manually
If you see a red LED on the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If
this is the case, connect them in the following order.
a Press the Power
button on the sound bar to turn it off.
b Press the Pairing button on the wireless subwoofer. Check if the LED on the subwoofer is blinking green. If
you still see a red LED on the wireless subwoofer, press and hold the button on the back of the subwoofer
again.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the wireless subwoofer light up in green.
Note
• Install the sound bar as close to the wireless subwoofer as possible. The closer the distance between the sound
bar and the wireless subwoofer, the better the sound quality.
• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.
• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar or the wireless
subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless routers,
microwave ovens, etc.).

LG SC9S Specifications

General

Line-in	No
Bluetooth	Yes
Bluetooth codec	SBC, AAC
Bluetooth version	5
Headphone outputs	0
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Subwoofer type	Active subwoofer
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	7 \
Display type	LED
Certification	Carbon Trust, UL ECV, Eco-Product, Energy Star
Product color	Black
Audio formats supported	AAC, AAC+, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	DTS Digital Surround, DTS-HD HR, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
Equalizer modes	Bass Blast, Bass Blast+
RMS rated power	400 W
Audio output channels	3.1.3 channels
Top speaker RMS power	90 W
Center speaker RMS power	30 W
Front speakers RMS power	60 W
Audio sample rate (24bit)	96 kHz
Center speaker sensitivity	83 dB
Cables included	HDMI
Number of products included	1 pc(s)
Impedance	4 Ω
Number of speakers	9
Soundbar speaker RMS power	180 W
AC input frequency	50 Hz
Soundbar power consumption	37 W
Power consumption (standby)	0.5 W
Power consumption (typical)	75 W
Subwoofer power consumption	38 W
Package type	Box
Package depth	261 mm
Package width	1296 mm
Package height	574 mm
Package weight	22700 g

Weight and Dimensions

Depth	284 mm
Width	1221 mm
Height	47 mm
Soundbar weight	4100 g
Subwoofer depth	313 mm
Subwoofer width	221 mm
Subwoofer height	390 mm
Subwoofer weight	7800 g