www.lg.com
Copyright © 2024 LG Electronics Inc. All Rights Reserved.
SG10TY
SIMPLE MANUAL
Wi-Fi
Soundbar
2312_Rev02
MFL72087308
HDMI OUT
b
D
E
OPTICAL INHDMI
TM
▶TV
(eARC/ARC)
HDMI
TM
IN
a
a
HDMI IN
(ARC)
HDMI IN
OPTICAL
OUT
B
A
c
c
C
f
(Android OS) (iOS)
b
Replacement of Battery
ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then
download Owner’s Manual. Some of the content in this manual may differ from your product.
A Soundbar
B Remote Control Receiver / Status Display
C Rear Speakers (Sold separately, SPT8-S)
D Wireless Subwoofer - Install it close to the soundbar.
E External Device - (Blu-ray player, game console, etc.)
a Connect the soundbar to your TV via an optical cable or an HDMI cable.
b If you are using an external device (ex. Set-top box, Blu-ray player, game console, etc.), connect it to the soundbar or to
the TV via an HDMI cable.
If necessary, purchase HDMI cables, an optical cable, or a USB extension cable to connect the soundbar.
c If you purchased the rear speakers separately, connect the rear speakers via a speaker cable. When connecting the rear
speakers, connect the black striped cable to the negative terminal of each speaker and the remaining cable to the positive
terminal of each speaker.
d Connect to power in the following order: wireless subwoofer [ rear speakers [ Soundbar. Then, turn on the Soundbar.
When the connection is automatically established with the Soundbar, the LEDs on the wireless subwoofer and the rear
speakers will light up in green.
e Using the product with your TV
A Press the Function
button repeatedly until “OPT/HDMI ARC” appears on the status display.
B On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
C When the TV is properly connected to the product, “OPT”, “ARC”, or “E-ARC” will appear on the status display with a
sound.
You can enjoy the sound by connecting LG WOWCAST (Sold separately, WTP3) to the Soundbar wirelessly.
f Connecting the product to your smartphone via Wi-Fi
A Connect your smartphone to Wi-Fi.
B Install the LG Soundbar app on Google Play or the App Store.
C Run the LG Soundbar app and follow the instructions.
D The product will connect to your smartphone and you can control the product with LG Soundbar app.
g Connecting the product to your smartphone via Bluetooth
A Tap the Settings
button on your smartphone and select Bluetooth. Turn on the Bluetooth function.
( Off > On)
B Press the Bluetooth pair
button. After a moment, you will see “BT READY” on the status display.
C Find and select “LG_Speaker_SG10TY_XXXX”.
D When the product is connected to your smartphone via Bluetooth, you can see the status display change from
“PAIRED” [ “Connected Bluetooth device name” [ “BT”.
If you see a red LED on the wireless subwoofer or rear speaker, it means that the soundbar is not connected to the speakers.
If this is the case, connect them in the following order.
A Press the Power
button on the soundbar to turn it off.
B Press the PAIRING button on the back of the wireless subwoofer or rear speaker. Check if each LED blinks green.
- If you still see a red LED on the wireless subwoofer, press and hold the button on the back of the subwoofer again.
C Press the Power
button on the soundbar to turn it on.
D When the connection is established, you will see a green LED light on the wireless subwoofer or rear speaker light up.
Keep the soundbar, the subwoofer and rear speakers away from the device (ex. wireless router, microwave oven, etc.) over 1 m to
prevent wireless interference.
y Some speakers may not make sound depend on the input source. Select BASS BLAST (BASS BLAST+) sound mode to listen through
all speakers.
y Design and specifications are subject to change without notice.
y Google Play is a trademark of Google LLC.
SG10TY.DAUSLLK_SIMPLE_ENG_MFL72087308.indd 1-3 2024-01-09 5:02:34
To Next Page
Need help?
General
