LG SH5B - LG Sound Sync: Wired Connection Setup; LG Sound Sync: Wireless Connection Setup

Operating 25
Operating
3
With wired connection
1. Connect your LG TV to the unit by using an
optical cable.
Optical
cable
2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound
output]
[
[LG Sound Sync (Optical)]
3. Turn on the unit by pressing
1
(Power) on the
remote control.
4. Select the input source to OPT (Optical) by
pressing F button repeatedly.
You can see "LGOPT" on the display window if
connecting normally between this unit and your
TV.
With wireless connection
1. Turn on the unit by pressing
1
(Power) on the
remote control.
2. Select the input source to LG TV by pressing F
button repeatedly.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound
output]
[
[LG Sound Sync (Wireless)]
"PAIRED" appears on the display window for
about 3 seconds and then you can see "LG TV"
on the display window if connecting normally
between this unit and your TV.
If you turned off the unit directly by pressing
1
(Power), LG Sound Sync (Wireless) will be
disconnected. To use this function again, you
should reconnect the TV and the unit.
,
Note