Why is my LG SH86TM-C remote control not working?
If the remote control for your LG Home Theater System isn't working correctly, it could be due to several reasons: - The remote might not be pointed at the unit's remote sensor. - It could be too far from the unit. - There might be an obstacle blocking the signal. - The batteries in the remote could be exhausted.
How to fix an LG Home Theater System with no power?
If your LG Home Theater System has no power, ensure the power cord is securely plugged into the wall outlet.
What to do if there is no picture on my LG Home Theater System?
If you're not getting a picture from your LG Home Theater System, try these steps: - Select the correct video input mode on your TV. - Ensure the video connections are secure. - Verify the [HDMI Color Setting] in the [Setup] menu matches your video connection. - Your TV might not support the current resolution; try changing it. - Note that if the player’s HDMI OUT jack is connected to a DVI device that does not support copyright protection, this could be the cause.
Why won't my LG SH86TM-C Home Theater System start playback?
If your LG Home Theater System isn't starting playback, consider the following: - Ensure you've inserted a playable disc, checking its type, colour system, and regional code. - Place the disc with the playback side facing down. - Make sure the disc is correctly placed on the disc tray inside the guide. - Clean the disc. - Cancel the Rating function or adjust the rating level if it's enabled.
Why is the BD-Live feature not working on my LG Home Theater System?
If the BD-Live feature isn't working on your LG Home Theater System, check these: - Ensure the connected USB storage has at least 1GB of free space. - Verify the unit is connected to the local area network and can access the internet. - Your broadband speed may not be sufficient; consider contacting your ISP to increase it. - Check that the [BD-LIVE connection] option in the [Setup] menu is set to [Permitted].
Why is there no sound coming from my LG Home Theater System, or why is it distorted?
If you're experiencing no sound or distorted sound from your LG Home Theater System, it could be due to a few reasons: - The unit might be in scan, slow motion, or pause mode. - The sound volume might be set too low. - Check the speaker cable connection.
What to do if the LG Home Theater System remote control doesn’t work?
If the LG Home Theater System's remote control isn't working, make sure to point it directly at the unit from within 23 feet (7m), and remove any obstacles in the way. Also, replace the batteries with new ones.
Why is there no picture on my LG SH86TM-C Home Theater System?
If there is no picture on your LG Home Theater System, select the correct video input mode on your TV so that the picture from the unit appears. Also, check that the video cables are securely connected to both the TV and the unit.
What to do if my LG SH86TM-C Home Theater System has little or no sound?
If you experience little or no sound from your LG Home Theater System, verify that you've selected the correct input mode on the unit. Ensure the audio cables are correctly connected to the terminals, and if necessary, replace the audio cable.
Why do streaming services buffer on my LG Home Theater System?
If streaming video services on your LG Home Theater System frequently stop or buffer, it's likely that your broadband service speed isn't fast enough. Contact your Internet Service Provider (ISP) to increase your broadband speed.
General| Brand | LG |
|---|---|
| Model | SH86TM-C |
| Category | Home Theater System |
| Language | English |
To Next Page
