LG Single "A" - Auto Restart

Part 2 Functions & Controls
- 25 -
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate proce-
dures automatically to the previous operating conditions.
2-2. Floor Standing type_PT
Press the fan speed button and High temperature setting buttons simultaneously for 3 seconds.
The unit will respond with beep.
1
2
3
After 3 second,
it will shift
After 3 seconds,
it will shift
After pressing
the buttons
it will shift
immediately
After 3 seconds,
it will shift
During Child Lock Operation
➊ Whenever you press any Button, it will immediately display
“ ”, which means Button is Locked.
❷ All the Button on the indoor unit will not work.
❸ But the Button on the remote controller will work.
For releasing child lock Operation
Press the fan speed button and High temperature setting buttons simultaneously for 3 seconds.
The unit will respond with beep, Child Lock Operation will removed.
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate proce-
dures automatically to the previous operating conditions.