LG SK1 Simple Manual

Additional Information
Specication
Power requirements
Refer to the main label.
Power
consumption
Refer to the main label.
Networked standby : 0.5 W
(If all network ports are
activated.)
Dimensions
(W x H x D)
Approx.
650.0 mm x 79.0 mm x
94.0 mm With foot
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Press and hold (Mute) on the remote control for
about 2 seconds and turn off the unit.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type Sound
Bar is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet
address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
Wall mounting (Optional)
You can mount the main unit on a wall by using holes on
the rear of the unit. For details, download the online owner’s
manual. http://www.lg.com
a b
dc
BUY :
SK1.AEUSLLK_SIM_ENG_MFL70443680.indd 4 2018-05-14  9:22:20

LG SK1 Specifications

General

Package depth	202 mm
Package width	724 mm
Package height	138 mm
Package weight	2780 g
Audio decoders	Dolby Digital
RMS rated power	40 W
Audio output channels	2.1 channels
Tweeter impedance	4 Ω
Woofer diameter (imperial)	2.25 \
Signal-to-Noise Ratio (SNR)	82 dB
USB port	Yes
Audio (L/R) in	1
Bluetooth version	4.0
HDMI ports quantity	-
Connectivity technology	Wired & Wireless
Product color	Black
Audio formats supported	AAC, AAC+, LPCM
Power consumption (typical)	13 W
Subwoofer included	No

Weight and Dimensions

Depth	94 mm
Width	650 mm
Height	79 mm
Soundbar weight	1990 g