[Register Product (ThinQ)]
① Tap the Settings button on the washer LCD
screen.
② Tap the Wi-Fi button on the Settings screen.
③ Tap the Wi-Fi on/off button. The Wi-Fi is turned
on when a check is displayed on the box.
④ Select your network from the list of available
networks.
⑤ If necessary, enter your wireless password.
LG Smart ThinQ is a service that manages the appliances in your home. You can remotely control
your washer after registering the ThinQ ID through the display found on front of the product.
Follow the steps below to register your product. If the washer is already connected to Wi-Fi then skip
to step 2.
6
2. Getting ready to use LG HomeChat
Step 1. Setting Wireless Network for Washer
⑥ Wi-Fi setting is complete. Tap the ‘Product
Registration’ button and proceed to step 2.
To Next Page
Loading...
