LG SPD75YA User Manual

6
Installation
Connecting the Product
You can enjoy a richer sound by connecting the sound bar to the wireless subwoofer.
Connecting the wireless subwoofer automatically
After completing installation, the wireless subwoofer will automatically be connected to the sound bar. Connect
the sound bar to the subwoofer in the following order.
a Plug the power cable into the wireless subwoofer.
b Plug the power cable connected to the wireless subwoofer into an outlet.
c Plug the power cable into the AC adapter.
d Connect the AC adapter cable to the DC IN (AC adapter input) terminal on the back of the product.
e Plug the power cable connected to the AC adapter into an outlet.
f When the connection is automatically established, you will see the LED on the back of the wireless subwoofer
light up in green.
Note
• Make sure to use the provided AC adapter. Using other AC adapters may lead to malfunction
and will forfeit the product warranty.
Installation

LG SPD75YA Specifications

General

Audio decoders	DTS Digital Surround, DTS-HD HR, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
Equalizer modes	Bass Blast, Bass Blast+
RMS rated power	400 W
Audio output channels	3.1.2 channels
Top speaker RMS power	96 W
Center speaker RMS power	38 W
Front speakers RMS power	76 W
Audio sample rate (24bit)	192 kHz
Subwoofer connectivity	Wireless
Product color	Black
Virtual assistant	Amazon Alexa & Google Assistant
Audio formats supported	AAC, FLAC, LPCM, MP3, OGG, WAV
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
HDMI in	1
Bluetooth version	5.0
Connectivity technology	Wired & Wireless
Package depth	456 mm
Package width	1168 mm
Package height	284 mm
Package weight	14600 g
Soundbar speaker RMS power	210 W

Weight and Dimensions

Depth	119 mm
Width	1060 mm
Height	57 mm
Soundbar weight	4400 g
Subwoofer depth	312.8 mm
Subwoofer width	221 mm
Subwoofer height	390 mm
Subwoofer weight	7800 g