9
Connecting the rear speakers to the wireless receiver (SPK8-S, sold
separately)
Automatic connection
After completing installation, the wireless receiver will automatically be connected to the sound bar. Connect the
sound bar to the wireless receiver in the following order.
a Connect the speaker cables to the corresponding terminals on the rear speakers (left, right).
Connect the black striped cable to the negative terminal and the other cable to the positive terminal.
b Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.
Receiver Terminal Colour Speaker Position
Blue
L Left rear
Grey
R Right rear
c Plug the wireless receiver power cable into an outlet.
d Press the Power
button on the sound bar to turn it on.
e When the connection is automatically established, you will see the LED on the front of the wireless receiver
light up in green.
Note
• Please only use the speakers provided with the product. Using other speakers may cause
malfunction.
• Connect the speaker cables to the corresponding terminals. Connect to the positive cable
to the positive terminal and the negative cable to the negative terminal. An incorrectly
connected cable will distort the sound or produce no bass.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
