To Next PageTo Next PageHow to troubleshoot LG Sound Sync not working with LG SPN11-SR Speaker System?
If LG Sound Sync isn't working with your LG Speaker System: * Verify that your LG TV supports LG Sound Sync (Wired). * Check the connection of LG Sound Sync (Wired). * Review the sound settings on both your TV and the speaker system.
Why isn't the AUTO POWER function working on my LG SPN11-SR Speaker System?
If the AUTO POWER function isn't working on your LG Speaker System: * Check the connection of the external device, such as a TV or DVD/Blu-Ray player. * On your LG TV, check the SIMPLINK settings and try turning SIMPLINK off. * Be aware that this function may not operate correctly depending on the connected device.
What to do if my LG SPN11-SR Speaker System has no sound?
If your LG Speaker System isn't producing sound, there are several things to check: * Ensure the volume isn't set to the minimum. Adjust the volume accordingly. * If connected to an external device like a set-top box or Bluetooth device, verify and adjust the volume level on that device. * Check if the mute function is activated. Press the designated button or adjust the volume to deactivate it. * Confirm that the correct input source is selected for your setup.
Why LG Sound Sync does not work with my LG Speaker System?
If LG Sound Sync isn't working with your LG Speaker System, consider the following: * Confirm that your LG TV supports LG Sound Sync (Wired). * Verify the connection for LG Sound Sync (Wired). * Check the sound settings on both your TV and the speaker system.
What to do if there is no woofer sound from LG Speaker System?
If you're not getting any sound from the woofer of your LG Speaker System: * Ensure the subwoofer is properly plugged into a wall outlet. * Check if the pairing between the unit and the subwoofer has been disconnected.
Why the remote control of my LG Speaker System does not work properly?
If the remote control for your LG Speaker System isn't working correctly, consider these potential causes: * The remote control might be too far from the unit. Try operating it within a 7-meter range. * There might be an obstacle blocking the signal between the remote control and the unit. Remove any obstructions. * The batteries in the remote control might be depleted. Replace them with new ones.
What to do if my LG SPN11-SR Speaker System is not working properly?
If your LG Speaker System isn't working properly, try the following: * Turn off the power to both the unit and any connected external devices like TVs, woofers, DVD players, or amplifiers, and then turn them back on. * Disconnect the power cord from the unit and connected external devices, then reconnect them. * Be aware that previous settings might not be saved if the device power is shut off.
Why is my LG Speaker System remote control not working?
To resolve remote control issues with your LG Speaker System: * Ensure the remote is within 7 meters of the unit. * Remove any obstacles blocking the path between the remote and the unit. * Replace the batteries with new ones.
What to do if LG Speaker System cannot connect to home network?
If your LG Speaker System is unable to connect to your home network: * Move the speaker away from household devices that use radio frequencies, as they may cause wireless interference. * Check your router by turning it off and then back on. * Ensure that the Wi-Fi feature is enabled on your smart device. * Verify that both the speaker and your smart device are connected to the same Wi-Fi network.
How to increase low output sound on LG SPN11-SR?
If the output sound from your LG Speaker System seems low: * Switch the DRC (Dynamic Range Control) function to OFF using 'LG Sound Bar'. * If the sound bar is connected to a TV, change the AUDIO DIGITAL OUT setting in the TV Setup Menu from PCM to AUTO or BITSTREAM. * If connected to a Player, change the AUDIO DIGITAL OUT setting in the Player Setup Menu from PCM to PRIMARY PASS-THROUGH or BITSTREAM. * Change the Audio DRC setting on the connected device's setup menu to the OFF state. * Ensure that Night Time mode is not enabled. Turn off Night Time mode.
General| Brand | LG |
|---|---|
| Model | SPN11-SR |
| Type | Sound Bar |
| Channels | 7.1.4 |
| Subwoofer | Yes |
| Wireless Subwoofer | Yes |
| HDMI Inputs | 2 |
| HDMI Output | 1 |
| HDMI | Yes |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Optical Input | Yes |
| Wall Mountable | Yes |
| Connectivity | HDMI, Optical, Bluetooth |
General warnings and precautions for safe operation and installation, including speaker duct safety.
Guidelines for safe handling and use of the power cord.
Controls for microphone status, power, and function selection.
Buttons for adjusting volume, muting sound, and activating Google Assistant.
Steps to download and install the necessary Google Home application.
Detailed steps to launch the app and establish a Wi-Fi connection for the speaker.
Procedure for manually pairing the wireless rear speakers if automatic connection fails.
Steps to connect via HDMI for TV audio, using ARC/eARC.
Explanation of Dolby Atmos and DTS:X, and their usage requirements.
How to activate and use voice commands with the Google Assistant.
Examples of voice commands for time, weather, plans, alarms, music, volume, and smart home.
Lists available voice commands for controlling LG TV functions via the sound bar.
Lists commands for controlling the sound bar's functions like power, input, and sound effects.
Steps for pairing a Bluetooth device and streaming music.
Managing playback (play, pause, volume) of connected Bluetooth devices from the sound bar.
Common problems like unit not working, no power, no sound, and their solutions.
Solutions for problems connecting the speaker to a home network or Wi-Fi.
Causes and solutions for wireless interference and Bluetooth device malfunctions.
Comprehensive technical details including dimensions, power, audio, and wireless components.
