3 Operating
Operating16
Operating
3
Operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down and prevent sudden increase of sound (Dolby
Digital only). This function turns on or off when you
press DRC ON/OFF.
Turn off the sound temporarily
Press
[
(Mute) to mute your unit.
To cancel it, press
[
(Mute) again on the remote
control or change the volume level.
Using your TV remote control
You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and
mute.
Press and hold DRC ON on the remote control for
about 2 seconds. The standby LED blinks once. And
then this functions is enabled.
To turn off this function, press and hold DRC OFF
about 2 seconds. The standby LED blinks once. And
then this functions is disabled.
y
Supported TV brands
LG Panasonic Philips Samsung
Sharp Sony Toshiba Vizio
y
Make sure that the sound output of your TV
is set to [External speaker].
y
Depending on the remote control, this
function may not work well.
y
This function does not operate on LG TV's
magic remote control.
,
Note
Auto display Dimmer
Function LED will be darkened automatically if there
is no key input for 15 seconds.
When you press any button, the Function LED will be
brighten.
Auto power down
This unit will turn itself off to save electric
consumption if the main unit is not connected to
an external device and has not been used for 15
minutes.
This unit also turns off after six hours if the Main
unit has been connected to another device using the
analog input. (Ex : Portable, etc..)
How to deactivate the wireless
network connection(s).
Set up the AUTO POWER ON/OFF function to off
and turn off the unit.
To Next Page
Loading...
Need help?
General
