Operating 27
Operating
3
Auto function change
This unit recognises input signals such as Optical,
Bluetooth and Portable and then changes suitable
function automatically.
When optical signal comes in
When you turn on the external device connected
to this unit by an optical cable, this unit change the
function to optical. You can hear the sound from your
device.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When 3.5 mm stereo cable is
connected
When you connect your portable device using a 3.5
mm stereo cable, this unit changes the function to
Portable. You can hear the music from your device.
y
To change to optical function, it needs
5 seconds of no signal.
y
If the Bluetooth connection lock function
is set, Bluetooth connection will be only
available on Bluetooth function.
(Page 29)
,
Note
To Next Page
Loading...
Need help?
General
