LG SPQ8-S Simple Manual

www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.2201_Rev01
MFL71890803
SPQ8-S
SIMPLE MANUAL
Wireless
Rear Speakers Kit
B
A
a
a
a
(Compatible LG Wi-Fi Sound Bar)
ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
A Rear Speakers B Wireless Receiver
a Connect the rear speakers to the wireless receiver via a speaker cable. When connecting the rear speakers to the wireless receiver,
connect the black striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of each
speaker.
b Connect to power in the following order: wireless receiver [ sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LEDs on the wireless receiver will light up green.
Surround Sound On/Off
When you turn on surround function, you can enjoy magnicent surround sound for all the input sound source with rear speakers.
The initial setting for the surround function is OFF, turn the surround function ON to use it. Refer to the on-line manual for settings of
surround sound function.
If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the speakers. If this is the case,
connect them in the following order.
A Press the Power
button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless receiver. Check if each LED blinks green.
C Press the Power
button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the front of the wireless receiver light up green.
Keep the sound bar and wireless receiver away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless
interference.
y You can nd compatible soundbars using the QR code on page 2 in this manual.
y Design and specications are subject to change without notice.
SPQ8-S.DAUSLLK_SIMPLE (Sheet)_MFL71890803.indd 1-3 2022-03-18   3:05:39

LG SPQ8-S Specifications

General

RMS rated power	140 W
Audio output channels	2.0 channels
Surround modes quantity	1
Bluetooth	-
Connectivity technology	Wireless
Number of speakers	2
Subwoofer included	No
Product color	Black
Wall mountable	Yes
Number of products included	3 pc(s)
Package depth	145 mm
Package width	477 mm
Package height	262 mm
Package weight	2800 g

Weight and Dimensions

Rear speaker height	140 mm