INSTALLATION INSTRUCTIONS
After the washer is in the home, remove the
carton and Styrofoam® shipping base from
the washer.
UNPACK THE WASHER
When removing the washer from the carton
base, be sure to remove the tub support in the
middle of the carton base.
If you must lay the washer down to remove the
base packaging materials, always protect the
side of the washer and lay it carefully on its side.
Do NOT lay the washer on its front or back.
TOOLS YOU WILL NEED
• Adjustable Pliers
• Carpenter’s Level
Carton Base
Tub support
1
Remove the packing block containing the
owner's manual, parts, water hoses, and
laundry product samples.
2
Unfasten the power cord from the back of the
washer.
3
To Next Page
Loading...
