LG T1666NETFC /01 - Page 28

28
EN
Manual Washing
When you need a rinse and spin, spin only, rinse only or wash only cycle, these can be set manually.
Wash onlyRinse onlySpin onlyRinse and Spin
t or s
Press the POWER button.
1
Press the Wash
button.
Press the Rinse
button.
Press the Spin button.
Press the Rinse
button.
2
Rinse and spin are
automatically selected.
Press the Spin button
until the spin function
is cancelled.
Press the Spin button
to adjust spin strength.
Rinse and spin are
automatically selected.
3
Press the Rinse and
Spin buttons until the
rinse and spin options
are cancelled.
Press the Rinse
button to adjust the
number of rinses.
Press the Rinse and
Spin buttons to adjust
the number of rinses
and spin strength.
4
u
Press the START/PAUSE button to start the cycle(s).
5
NOTE
• When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will
not be drained out after the wash is completed. If you wish to drain the water, select a spin only cycle
after the wash has completed.
• If a rinse only cycle is selected, the process will start from the inlet water being supplied.
• If you do not select or change the Water Level, the water level will be set automatically.