25
EN
Option Programme
Water
• Press the Water button to adjust water level.
• This machine detects the quantity of laundry
automatically, then sets Water Level. It may
be necessary to increase the water level
manually when washing bulky light weight
clothes.
• When you select a wash programme, the
Water Level will be shown on the control
panel.
• When Water Level is automatically detected, it
may differ depending on the quantity of
laundry even though the same Water Level is
indicated on the control panel.
• Water level can be changed when operation is
paused.
Wash
• Press the Wash button to change laundry
time.
• Adjusting the wash level setting will modify the
cycle times and/or wash actions. Press the
Wash button until the desired wash level is
selected.
Rinse
• Press the Rinse button to change the number
of rinses.
Temp. (Optional)
• If you want to to select water temperature,
press the Temp. button to allow you to select:
Cold → Warm (Hot & Cold) → Hot → Cold
respectively.
• Default setting is Cold.
Spin
• Press the Spin button to change spin
strength.
• Press Start/Pause button to indicate
remaining time.
NOTE
• Always keep the laundry amount to 2 kg or
less and make sure to spread it out evenly.
• Select 60 minutes for cotton laundry and 120
minutes for synthetic fiber laundry for effective
moisture removal.
Air Dry (Optional)
When you select Air Dry, you can reduce the
drying time by minimizing the moisture is the
laundry.
• Air Dry selection lights up in sequence as
follows : Tub Dry → 60 → 90 → 120 → Tub
Dry as the button is pushed.
Soil Level (Optional)
• This button allows you to secelet the strength
of the wash action.
• Soil Level selection lights up in sequence as
follows : Normal → Heavy → Light → Normal
as the button is pushed. This can be selected
for any programme.
• Adjutment can be made while washing.
Soak
• Soak can be selected to wash heavily soiled
laundry by soaking in water for some time to
remove dirt and grime.
1
Press the Power button.
2
Select a washing programme.
3
Press the Wash button until icon turns
on.
4
Press the Start/Pause button.
To Next Page
Loading...
