7
4
PROGRAM CYCLE
High Temp. / Low Temp.
These are functioning to shorten or lengthen
the cycle time by increasing or decreasing
temperature.
Buzzer off
This is about buzzer sound on/off.
After power is on and you select cycle, buzzer
will sound when you press a certain button on
the panel.
If you don’t like to hear that sound, just press
button. The Buzzer is then turned -off.
Wrinkle care
Wrinkle care is functioning to prevent creases
and rumples that are formed when the
laundry is not unloaded promptly at the end
of drying cycle. In this function, the dryer
repeatedly runs and pauses to the cycle end.
If the door is open during Wrinkle care
process, this function is cancelled. But in
case of door open during normal operation
without selecting Wrinkle care, this function
will be remembered and processed.
Favourite
If there is some cycle you would like to make
based on your own drying habit, use “Favourite”.
Once favourite cycle is stored, you can repeatedly
use next time before changing the stored setting.
For instance, you turn power on and select Extra
Dry in Cotton Cycle and Low temp and Anti-
Crease in series and then lastly press “Favourite”
until the dryer beeps. It’s about 3 seconds. That’s
all you have to do.
The next time, when turning the dryer on and
pressing “Favourite” you can see the above
options you select displays on the panel.
Time Delay
You can use the Time Delay function to delay
the finishing time of drying cycle.
Maximum Time Delay is 19 hours.
1. Turn the dryer on
2. Select cycle
3. Set time delay hour
4. Press Start/Pause button
Child Lock
For the safety of your children, press High Temp.
and Low Temp. buttons at the same time for
about 3 seconds. You can check this function by
seeing the dryer display “ ” on LED window.
To Next Page
Loading...
Need help?
General
