EasyManua.ls Logo

LG Therma V AHNW09604A2 User Manual

LG Therma V AHNW09604A2
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.lg.com
Air-to-Water Heat Pump
Please read this installation manual completely before installing the product.
Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
Please retain this installation manual for future reference after reading it thoroughly.
INSTALLATION MANUAL
AIR
CONDITIONER
P/NO : MFL68681805
For more information, Refer to the CD or LG Web site (www.lg.com).
[
Representative
] LG Electronics Inc. EU Representative : LG Electronics European Shared
Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands
[Manufacturer] LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro, Seongsan-gu,
Changwon-si, Gyeongsangnam-do, KOREA
ENGLISH
ITALIANO
ESPAÑOL
FRANÇAIS
DEUTSCH
ΕΛΛΗΝΙΚΆ
ČEŠTINA
NEDERLANDS
POLSKI
LIMBA ROMÂNĂ

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the LG Therma V AHNW09604A2 and is the answer not in the manual?

LG Therma V AHNW09604A2 Specifications

General IconGeneral
TypeAir-to-water heat pump
Energy Efficiency ClassA++
RefrigerantR32
COP4.5
EER3.8
Sound Power Level (dB(A))62
Power Source220-240V, 50Hz

Summary

Safety Precautions

Installation Safety Measures

Covers safety precautions for installing the unit, including electrical and structural aspects.

Operation Safety Guidelines

Outlines crucial safety measures to follow during the unit's operation and use.

General Safety Cautions and Warnings

Provides important cautionary notes regarding handling, maintenance, and general product usage.

General Information and System Overview

Indoor and Outdoor Unit Wiring Diagrams

Provides comprehensive wiring diagrams for connecting indoor and outdoor units, including field wiring.

Outdoor Unit Installation Guide

Indoor Unit Installation Guide

Mounting the Indoor Unit to the Wall

Step-by-step instructions for securely mounting the indoor unit onto a wall.

Outdoor Unit Piping and Wiring

Refrigerant Piping Constraints

Defines limits for pipe length and elevation for refrigerant piping.

Refrigerant Piping Preparation

Step-by-step guide on preparing pipes for refrigerant connections, including flaring.

Connecting Refrigerant Pipes

Instructions for connecting refrigerant pipes between indoor and outdoor units, including tightening torque.

Electrical Wiring Specifications

Details power and connecting cable specifications, including wire types and terminal requirements.

Circuit Breaker Specification

Recommends appropriate circuit breaker ratings and types for power supply and heaters.

Power and Connecting Cable Wiring Procedure

Step-by-step guide for connecting power and communication cables to the outdoor unit.

Leakage Test and System Evacuation

Procedures for conducting leakage tests and evacuating the refrigerant system.

Indoor Unit Piping and Wiring

Water Piping and Circuit Connections

Guidelines for connecting water pipes and circuits, including general considerations.

System Setup and Configuration

Installer Setting Mode

Instructions on how to enter and use the installer setting mode for advanced configurations.

Check Points, Maintenance, and Troubleshooting

Pre-Operation Check List

A checklist of critical points to verify before starting the unit's operation.

Troubleshooting Operational Problems

Guidance on diagnosing and resolving common issues encountered during unit operation.

Troubleshooting Error Codes

A guide to identifying and resolving problems based on specific error codes displayed by the unit.

Related product manuals