LG ThinQ G8S User Manual

Custom-designed Features 37
ToF sensor
Proximity/Ambient
light sensor
IR illuminator
Front camera
Registering Hand ID
Before using the Hand ID feature, register your palm vein data on your
device.
1
Tap Settings General Lock screen & security Hand ID.
2
Tap NEXT and unlock the screen according to the specified method.
3
Place the device on a flat surface and tap START.
4
Register your palm by following the on-screen instructions.
• Place your palm at a distance of 15 ~ 20 cm (6 ~ 8 inches) from the
device.
• When the device recognises your palm, slowly lower the palm
towards the ToF sensor.
• Tap CONTINUE to register again with the device placed in a
different position.
5
When the palm registration is done, tap OK.
Unlocking the screen with Hand ID
You can unlock the screen with your hand.
1
Tap Settings General Lock screen & security Hand ID.
2
On the Hand ID settings screen, configure the following settings:
• Delete hand data: You can delete the registered Hand ID data and
register it again if the Hand ID does not work properly.
• Cover to wake for Hand ID: You can wake your phone and then
use the Hand ID by covering the screen when the screen is off.

LG ThinQ G8S Specifications

General

Display Size	6.21 inches
Display Type	OLED
Resolution	1080 x 2248 pixels
Processor	Qualcomm Snapdragon 855
RAM	6 GB
Internal Storage	128 GB
Battery Capacity	3550 mAh
Dimensions	155.3 x 76.6 x 8 mm
Water Resistance	IP68 dust/water resistant
Colors	Mirror Black, Mirror Teal, Mirror White
Operating System	Android 9.0 (Pie), upgradable to Android 10
Rear Camera	12 MP (wide) + 12 MP (telephoto) + 13 MP (ultrawide)
Front Camera	8MP + TOF 3D