STACKING KIT INSTALLATION (cont.)
O P T I O N A L AC C E S S O R I E S
3
Place the dryer on top of the washer by
fitting the dryer feet into the side brackets as
illustrated. Avoid finger injuries; do not allow
fingers to be pinched between the washer
and dryer. Slowly slide the dryer toward the
back of the washer until the side bracket
stoppers catch the dryer feet.
4
Insert the front rail between the bottom of
the dryer and the top of the washer. Push the
front rail toward the back of the washer until it
comes in contact with the side rail stoppers.
Install the two remaining screws to secure the
front rail to the side rails.
Washer
Dryer
3828EL3010F_ENG.indd 42 2007.10.2 2:12:4 PM
To Next Page
Loading...
Need help?
General
