27
EN
Steam (for steam models)
• Press the Steam button to use steam.
• Steam is automatically selected under the
Allergy Care programme.
Time Delay
• You can set a time delay so that the washing
machine will start automatically and finish after
a specified time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Time Delay button to set the
required Delay time.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• Reservation can be made up to 18 hours by
1-hour interval up to 3 - 12 hours and 2-hour
interval for 12 - 18 hours.The Time Delay
cannot be set for less than 3 hours.
• To cancel the Time Delay function, press Time
Delay button repeatedly until the reservation
is canceled or press the Power button to turn
off and on power.
Strong Wave
• Press the Strong Wave button to control
water wave.
• Initially set at “medium” but will not be
indicated. To control wave power, press the
Strong Wave button.
Soak
• Soak can be selected to wash heavily soiled
laundry by soaking in water for some time to
remove dirt and grime.
1
Press the Power button.
2
Select a washing programme.
3
Press the Soak button to set time required.
4
Press each of Rinse and Spin button to
select the number of Rinse and Spin.
5
Press the Start/Pause button.
Delicate Wave (for non-steam
models)
• Press the Delicate Wave button to control
water wave.
• Initially set at “medium” but will not be
indicated. To control wave power, press the
Delicate Wave button.
Tub Dry
• Press the Tub Dry button to dry the empty tub
after a wash.
Buzzer
• If you want to use the washing machine
without the alarm signal sounds, press the
Buzzer button to allow you to select On or
Off.
• Default setting is On.
To Next Page
