Why is mobile data affecting my LG Washer's Wi-Fi connection?
If you're having trouble connecting your LG Washer to your smartphone, turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network.
What to do if my LG Washer shows a UE UNBALANCE ERROR?
If you see the UE UNBALANCE ERROR on your LG Washer, it means the appliance has detected an imbalance. First, redistribute the laundry to ensure proper spinning. If the load is too small, add one or two similar items to balance it. Then, close the door and press the Start/Pause button. Allow the washer a few moments to begin spinning, ensuring the door is locked.
Why is my LG F4V909 TS leaking water?
If your LG Washer is leaking, the house drain pipes may be clogged; unclog the drain pipe or contact a plumber if necessary. Alternatively, leakage may be caused by improper installation or a clogged drain hose, so clean and straighten the drain hose and check/clean the drain filter regularly.
What to do if my LG F4V909 TS Washer shows UE unbalance error?
If your LG Washer displays a UE UNBALANCE ERROR, it could be due to the laundry being too wet or the load being too small. To resolve this, rearrange the load to allow proper spinning, then close the door and press the Start/Pause button. If the load is too small, add one or two similar items to help balance it, then close the door and press Start/Pause. Note that the door must be locked before spin can be achieved.
How to fix 1E INLET ERROR on LG F4V909 TS?
The 1E INLET ERROR on your LG Washer indicates that the water supply is not adequate. First, check another tap in the house to ensure the water supply is sufficient. Make sure that the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Also, the filter of the supply hoses might be clogged, so check and clean the filter. If water leakage occurs in the aqua stop supply hose, replace it.
What to do if LG F4V909 TS shows PF power failure?
If your LG Washer experienced a power failure, restart the cycle.
What does FE overflow error mean on LG Washer?
If your LG Washer shows an FE OVERFLOW ERROR, it means water is overfilling due to a faulty water valve. Close the water tap, unplug the power plug, and call for service.
How to get rid of musty smell in LG F4V909 TS Washer?
If you notice a musty or mildewy odor in your LG Washer, the inside of the drum may not be cleaned properly. Run the Tub Clean function regularly to resolve this.
Why does my LG F4V909 TS Washer show a 1E INLET ERROR?
If your LG Washer displays a 1E INLET ERROR, it indicates a water supply issue. Start by checking another tap in your house to ensure adequate water supply. Make sure the water supply tap is fully open. Inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Also, check and clean the filter of the inlet hose. If you find water leakage in the aqua stop supply hose and the indicator is red, replace the aqua stop supply hose.
What to do if the door is open on LG F4V909 TS?
If the door of your LG Washer is open, close it and ensure that nothing is caught under the door preventing it from closing completely.
General| Model | F4V909 TS |
|---|---|
| Type | Front Load Washer |
| Capacity | 9 kg |
| Energy Rating | A+++ |
| Spin Speed | 1400 RPM |
| Weight | 70 kg |
| Color | White |
| Steam Function | Yes |
| AI DD™ | Yes |
| Noise Level (Spinning) | 74 dB |
| Programs | 14 |
| Smart Features | Yes (LG ThinQ) |
To Next Page
