To Next PageTo Next Page
Need help?Do you have a question about the LG UM30F and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | UM30F |
| Category | Air Conditioner |
| Language | English |
Section for logging purchase details and serial numbers for warranty purposes.
Lists and diagrams of tools required for product installation.
Guidelines for choosing the optimal placement for the indoor unit.
Specifies the minimum room floor area required for installation based on refrigerant type.
Guidance on accurately positioning suspension bolts for unit mounting.
Instructions for securely mounting the installation plate on the wall.
Steps for connecting the refrigerant pipes to the indoor unit.
Procedure for attaching the indoor unit to the installed mounting plate.
Details on connecting and insulating the drain pipe for proper water drainage.
Guidance on applying heat insulation material for refrigerant piping.
Instructions for making electrical connections between indoor and outdoor units.
Proper techniques for flaring copper pipes to prevent gas leakage.
Procedure for verifying the unit's operation after installation.
Steps to collect refrigerant into the outdoor unit for servicing or relocation.
Guide for using the smart diagnosis feature for troubleshooting.
Instructions for assembling and disassembling decorative panels and air filters.
Measures for ensuring proper operation in areas with heavy snowfall or cold temperatures.
Steps for fitting and securing the decorative panel to the unit.
How to access and activate the installer setting mode on the remote controller.
Table of function codes and their corresponding settings for installer mode.
Procedure for setting the unit's address for central control systems.
How to verify the currently set address for central control.
