LG UM60F User Manual

INSTALLATION MANUAL
AIR
CONDITIONER
www.lg.com
Please read this installation manual completely before installing the product.
Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
Please retain this installation manual for future reference after reading it thoroughly.
Original instruction
MFL71666401
Rev.05_011922
Copyright © 2019 - 2022 LG Electronics Inc. All Rights Reserved.
[Representative] LG Electronics Inc. EU Representative : LG Electronics European Shared
Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands
[Manufacturer] LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro, Seongsan-gu,
Changwon-si, Gyeongsangnam-do, KOREA
ENGLISH
ITALIANO ESPAÑOL
FRANÇAIS DEUTSCH
ΕΛΛΗΝΙΚΆ
ČEŠTINA
NEDERLANDS
POLSKI
LIMBA ROMÂNĂ

LG UM60F Specifications

General

Brand	LG
Model	UM60F
Category	Air Conditioner
Language	English

Summary

MODEL DESIGNATION

TIPS FOR SAVING ENERGY

SAFETY INSTRUCTIONS

INTRODUCTION

INSTALLATION PLACES

Select the best Location

Guidance on choosing an optimal site for unit installation.

THE INDOOR UNIT INSTALLATION

Position of suspension Bolt

Details on how to position suspension bolts for mounting the unit.

Connecting the Piping

Step-by-step guide for connecting refrigerant and drain pipes.

Mounting the anchor nut and bolt

Procedure for mounting anchor nuts and bolts for secure installation.

Wiring Connection

Guide for correctly connecting indoor and outdoor unit wiring.

INSTALLATION OF DECORATIVE PANEL(ACCESSORY)

INSTALLATION INSTRUCTIONS

Installer Setting - How to enter installer setting mode

Guide on how to access and use the installer setting mode on the remote controller.

Installer Setting - Installer Setting Code Table

Table listing function codes and their corresponding settings for installer configuration.

Installer Setting - Static Pressure Step Setting

Function to set static pressure steps for duct type units.

DIP SWITCH SETTING

Explanation of the function and settings of the DIP switches on the indoor PCB.