INSTALLATION INSTRUCTIONS
67
ENGLISH
NOTE
1. Be sure to set the value referring table 2. Unexpected set value will cause mal-function.
2. Table 2 is based at 230 V. According to the fluctuation of voltage, air flow rate varies.
3. Factory Set(External Static Pressure) each Model
* If it is zero static pressure, please set value below Maximum value.
Chassis Maximum value
M1 115
M2 120
M3 98
Capacity
(kBtu/h)
Factory set (E.S.P.) mmAq(Pa)
18
6(59)
24
30
36
42
48
60
To Next Page
Loading...
