PIPE CONNECTIONS BETWEEN INDOOR AND OUTDOOR UNIT
21
ENGLISH
Welding
- Pipe connections can be done on the front side or on the side according to the installation envi-
ronments.
- Be sure to let 0.2kgf/cm
2
Nitrogen flow in the pipe when welding.
- If Nitrogen was not flown during welding, many oxidized membranes may form inside the pipe
and disturb the normal operations of valves and condensers.
1.MFL68645302(영) 16. 12. 7. 영영 6:10 Page 21
To Next Page
Loading...
