EasyManua.ls Logo

LG UU24W User Manual

LG UU24W
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P/NO : MFL68907802
INSTALLATION MANUAL
AIR
CONDITIONER
www.lg.com
Please read this installation manual completely before installing the product.
Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
Please retain this installation manual for future reference after reading it thoroughly.
Ɠ
This product contains Fluorinated Greenhouse Gases. (R410A)
[
Representative
]
LG Electronics Inc. EU Representative : LG Electronics European Shared Service Center B.V.
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
[
Manufacturer
]
LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro, Seongsan-gu, Changwon-si,
Gyeongsangnam-do, KOREA
Single Inverter Outdoor Unit
Original instruction
ENGLISH
ITALIANO ESPAÑOL
FRANÇAIS
DEUTSCH
ΕΛΛΗΝΙΚΆ
ČEŠTINA
NEDERLANDS
POLSKI
LIMBA ROMÂNĂ
1,MFL68907802(영) 17. 7. 21. 영영 7:18 Page 1
Question and Answer IconNeed help?

Do you have a question about the LG UU24W and is the answer not in the manual?

LG UU24W Specifications

General IconGeneral
BrandLG
ModelUU24W
CategoryAir Conditioner
LanguageEnglish

Summary

Tips for Saving Energy

Important Safety Instructions

Installation Procedures

Installation of Outdoor Unit

Guidance on selecting optimal locations for outdoor unit installation, considering environmental factors and clearances.

Connecting Pipes

Procedures for preparing, flaring, and connecting refrigerant pipes between indoor and outdoor units.

Wiring Connection

Instructions for electrical wiring, including power supply, circuit breakers, and connecting indoor and outdoor unit cables.

Leakage Test and Evacuation

Steps for performing refrigerant leakage tests using nitrogen and evacuating the system with a vacuum pump.

Test Running

Procedures for initial power-on, test operation, and checking critical performance parameters after installation.

Installation PI485

Guidance on fixing the P1485 PCB, referring to a separate installation manual for detailed methods.

Function

Explanation of various operational modes, including Dip Switch settings for power saving, cooling, and quiet modes.

Installation Guide at the Seaside

Recommendations for installing the unit in seaside locations, focusing on protection against salt wind and corrosion.

Seasonal Wind and Cautions in Winter

Precautions for operating the unit in snowy or cold areas, including protection against snow and ice buildup.