68
* For vehicle/accessory
compatibility go to
www.verizonwireless.com/blueto
othchart.
4.1 Add New Device
Pairing is the process that allows
the handset to locate, establish,
and register a 1-to-1 connection
with the target device.
4.1.1 For pairing with a new
Bluetooth
®
device
1. Follow the Bluetooth
®
accessory
instructions to set the device to
pairing mode.
2. From standby mode, press
[
MENU
].
3. Press
Settings & Tools
.
4. Press
Bluetooth Menu
.
5. Press
Add New Device
.
6. Set the desired device to pairing.
7.
The device will appear in Add
New Device menu once it has
been located. Highlight the
device and press .
8.
The handset will prompt you for
the passcode. Consult the
Bluetooth
®
accessory instructions
for the appropriate passcode
(typically “0000” - 4 zeroes).
Enter the passcode and press .
When Auto Pair Handsfree is set
to On, the device will try to
automatically pair with the
headset.
9. When pairing with a PC or PDA
is successful, highlight either
Always Ask
or
Always Connect
and press to connect with the
device.
10. Once connected, you will see
the device listed in the
Bluetooth
®
Menu and when the
pair is transferring information,
the Bluetooth
®
indicator
will sho
w up on your screen.
4.1.2 Icon Reference in Adding
New Device
When the Bluetooth
®
wireless
connection is built and paired
devices are found, the following
icons are displayed.
Settings & Tools
68
To Next Page
Loading...
