LG VX9100 - enV2 Cell Phone - System and Network Settings; System Select and NAM Select; Auto NAM and Data;Fax Settings

LG 9100 69
8. Press to select Revert.
A confirmation message is displayed
briefly before the phone resets itself.
4.8 System Select
Allows you to set up the phone
management environment. Leave
this setting as the default unless you
want to alter system selection as
instructed by your service provider.
Using the Internal Keypad
1. Flip open the phone and press
[MENU].
2. Press Settings .
3. Press Phone Settings.
4. Press System Select .
5. Use the Directional Key to
scroll to a setting, then press .
Home Only/ Automatic
4.9 NAM Select
Allows you to select the phone’s NAM
(Number Assignment Module) if the
phone is registered with multiple
service providers.
Using the Internal Keypad
1. Flip open the phone and press
[MENU].
2. Press Settings .
3. Press Phone Settings.
4. Press NAM Select .
5. Use the Directional Key to
scroll to a setting, then press .
NAM1/ NAM2
4.10 Auto NAM
Allows the phone to automatically
switch between programmed
telephone numbers corresponding to
the service provider area.
Using the Internal Keypad
1. Flip open the phone and press
[MENU].
2. Press Settings .
3. Press Phone Settings.
4. Press Auto NAM .
5. Use the Directional Key to
scroll to a setting, then press
On/ Off .
4.11 Data/Fax
Allows you to use your phone to
transmit data and faxes.
Using the Internal Keypad
1. Flip open the phone and press
[MENU].
CX9100_Eng_1.0.qxd 8/9/08 11:37 AM Page 69