LG VX9100 - enV2 Cell Phone - Call and Data Settings; One Touch Dial and Auto Prepend; Do Not Disturb Mode

LG 9100 73
6. When connection is made, use the
TTY equipment to type in and send
a text message or send voice.
7. The voice or text message from the
receiver displays on the TTY
equipment display.
5.5 One Touch Dial
Allows you to initiate a speed dial
call by pressing and holding the
speed dial digit. If set to Off,
designated Speed Dial numbers will
not function.
Using the Internal Keypad
1. Flip open the phone and press
[MENU].
2. Press Settings
.
3. Press Call Settings .
4. Press One Touch Dial.
5. Use the Directional Key to
scroll to a setting, then press
On/Off.
5.6 Auto Prepend
This option will automatically
prepend 1 when dialing 10 digit
numbers. However 1 will not
prepend when dialing numbers that
has less than 10 digits.
Using the Internal Keypad
1. Flip open the phone and press
[MENU].
2. Press Settings
.
3. Press Call Settings .
4. Press Auto Prepend.
5. Use the Directional Key to
scroll to a setting, then press
On/Off.
5.7 Do Not Disturb
Allows you prevent interruptions
when connected via tethered data.
Using the Internal Keypad
1. Flip open the phone and press
[MENU].
2. Press Settings
.
3. Press Call Settings .
4. Press Do Not Disturb.
5. Use the Directional Key to
scroll to a setting, then press
On/Off.
CX9100_Eng_1.0.qxd 8/9/08 11:37 AM Page 73